Blacksmithing requires many tools that help the blacksmith make objects from metal. Many wonderful items are made by a blacksmith like gates, horseshoes and plant hangers. The metal is heated and pounded into the desired shape. Hammers, tongs and files are some of the tools used by a blacksmith.
Most blacksmith tools are made of iron but some have wooden handles on them. These wood handles need to be kept clean. You can keep them clean by taking a clean soft rag and soaking it in some tongue oil. The tongue oil cleans and conditions the wood to keep the wood moist. If the wood gets too dry it can split or crack and ruin the wood. A wood handle that is not cleaned and oiled will eventually need to be replaced and that can be more costly and time consuming then keeping it clean in the first place.
Hammers, tongs and other metal parts need to be oiled as well. The metal can rust even if they are kept in a dry place. Humidity can create rust on the metal in the best conditions and it can make the tools less desirable to use. If the rust is allowed to get too bad it can destroy the tool. To prevent your tools from getting rusty you need to coat them with a thin layer of oil to protect them. You can take a soft rag that has some tongue oil on it and rub it on the metal parts. Make sure you only spread a very thin layer of oil on the metal and then rub the tool with a soft dry absorbent rag to soak up any remaining oil. Let the tool air dry for a few hours before you use it.
Tools that get wet should be dried off as soon as possible to prevent the metal from forming rust. You can use a soft cotton rag to soak up the moisture and let the tool air dry completely before storing or oiling the tool
Blacksmithing tools should be kept in a dry place. The less moisture that the tools are stored in the better the tools will keep from rusting. You can hang the tools on a wall so air can get all around the tools. You can also keep them in a dry tool box until you are ready to use them.