The Occupational Safety and Health Administration is a government agency that is tasked with keeping workers safe while on the job in construction and certain industries. Obviously, a lot of construction (and other) employees fall under the regulation of OSHA, which is a great thing because accidents and dangers on the job are less likely. Most construction workers will be required to take classes ranging from a few hours to thirty hours on safety and other regulations. Fortunately, these courses are offered online. Here are some tips for OSHA’s online safety classes.
1. Pay close attention to the more important safety facts and regulations.
Most OSHA online courses work on a system of lectures and then quizzes. Failure to do well on the quizzes can result in the course actually resetting to the beginning. Therefore, it’s smart to pay attention to the materials that are likely to be on all these quizzes. Paying attention to specific safety information, regulations, and information on various machinery or other items will help you pass these quizzes without a problem. During the lectures, you should be able to identify and remember the most important items because the tests don’t really ask about obscure topics.
2. Always get passing grades on the quizzes the first time through.
Under typical circumstances, you have only three attempts on each quiz and test before you can get kicked out of the class or be required to start the entire program over again. You shouldn’t even risk having to take any quiz or test a second time, so it’s important to pay attention during each lecture and get a 70% or better on each one. For the most part, each section is fairly straightforward and easy to pass, so there is no excuse for failing even once. Just remember that three times is the limit before bad things happen.
3. Don’t forget about the 15 minute timeout rule.
More than likely, your online OSHA course will have a few measures put in place so that you can’t just run down the timer (if the class requires a certain number of hours) by leaving the computer to do other things. There is usually a timer that starts as soon as you open up a lecture, which will last 15 minutes. Letting that timer elapse will result in a logout so that the course isn’t open until you log in again. On that note, you will need to stick to the computer and actually do the course. Sure, there are methods for getting around the timer, but you might as well do the work.
4. Remember specific safety regulations that apply to your work.
During the course, you should focus on actually learning specific regulations as they pertain to your specific work. This can help you actually avoid accidents or hazards on the job. Plus, you will easily be able to tell if your employer or someone else is being lax on the rules, which could result in harm to others. You should do everything in your power to keep yourself and your co-workers safe. It doesn’t hurt to pay closer attention to things that involve your line of work.
5. Utilize the supplemental resources available to you.
All courses come with supplemental materials and resources that you can access while going through the entire course. Obviously, this material can help you out on tests and quizzes. On top of that, there is some pretty interesting information contained within the extra materials that are worth giving a look. You can learn a few extra things that might come in handy after the class is over, so give it a shot.
OSHA classes are normally a requirement.
Almost every construction worker should have to take a course provided by OSHA from time to time. There are very few exceptions in certain industries like construction that don’t fall under the agency’s safety requirements. Luckily, the courses aren’t that difficult, especially since they are offered online for workers to complete at their convenience. These courses shouldn’t be taken lightly because they revolve around safety and laws though. Such information could and will save lives on the job.
For more information, visit ClickSafety.